 | |||||||
|
|||||||
 |
| |||||||
|
|||||||
|
| DTDG23YP资料 | |
 |
DTDG23YP PDF Download |
|
File Size : 116 KB Manufacturer: FUJI Description: ...Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits which now can be more asily implemented in single power supply |
|
| has a pull down resistor to force the part into LDO mode when a clock signal is not present. To place the NCP1501 in LDO mode, the user must set the Synchronization pin low. The LDO mode guarantees an output in excess of 50 mA. Pins CB0 and CB1 control the output voltage selection. The four voltages are 1.05 V, 1.35 V, 1.57 V, 1.8 V. CB0 contains a pull down resistor and CB1 contains a pull up resistor internal to the NCP1501. The resistors force the output of the converter to 1.35 V if the pins are floating connections to the external circuit. The Shutdown Pin enables the operation of the device. The Shutdown Pin has an internal pull down resistor to force the NCP1501 into the off mode if this pin is floating due to the external circuit. During Startup, the NCP1501 has a soft start function to limit fast dV/dt and eliminate overshoot on the output. | |
| 相关型号 | |
| ◆ DTA114EK | |
| ◆ DTA114EUA | |
| ◆ DTA114TKA | |
| ◆ DTA114YUA | |
| ◆ DTA123EKA | |
| ◆ DTA123YKA | |
| ◆ DTA124EUA | |
| ◆ DTA143EUA | |
| ◆ DTA144TUK | |
| ◆ DTC114EKA | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：DTDG23YP 厂 家：ROHM 封 装：06+ 批 号：3000 数 量：SOT89 说 明： |
|||||
| 运 费： 所在地： 新旧程度： |
|||||
| 联系人：陈先生 马小姐 |
| 电 话：0754-86670421 |
| 手 机：13923955979/13380411239 |
| QQ：458301104 |
| MSN：mxdz888@hotmail.com |
| 传 真：0754-86670421 |
| EMail：muxing89223@yahoo.cn |
| 公司地址： 广东汕头潮南区陈店粤东电子城北二路92号 |
建议使用分辨率:1024*768